Forum: open-discussion

RE: Reading raw data [ Reply ] By: Pavel Goldstein on 2014-08-20 20:45	[forum:41395]
Ok, thanks!

RE: Reading raw data [ Reply ] By: Abraham Otero on 2014-08-20 15:43	[forum:41394]
No, you need an external beat detector; ther are serveral vailable in http://www.physionet.org

RE: Reading raw data [ Reply ] By: Pavel Goldstein on 2014-08-20 15:41	[forum:41393]
Thank you for the answer. Do other R packages can read raw ECG?

RE: Reading raw data [ Reply ]
By: Constantino Antonio on 2014-08-20 08:17

[forum:41392]

Dear Pavel Goldstein,

Nowadays, RHRV is not able to analyze directly an ECG recording. In order to use
RHRV, you need to provide him with the time of occurrence of each heartbeat. For
example, you can use these QRS detectors from Physionet, which are free and
opensource:
* wqrs: http://physionet.org/physiotools/wag/wqrs-1.htm
* ecgpuwave: http://physionet.org/physiotools/ecgpuwave/

Kind regards!

RE: Reading raw data [ Reply ] By: Abraham Otero on 2014-08-20 08:17	[forum:41391]
Do you mean you have the full electrocardiogram recording and not the position of the beats? RHRV requires the position of beats. You need to use a heartbeat detector before using RHRV

RE: Reading raw data [ Reply ] By: Pavel Goldstein on 2014-08-19 18:34	[forum:41390]
In other words, I have full PQRST complex data

Reading raw data [ Reply ] By: Pavel Goldstein on 2014-08-19 15:32	[forum:41389]
Hello, I'm using Mindware hardware that saves me raw data with sample rate 500 Hz. Can I import and process such kind of data in RHRV? Thanks,